AL1 Professional Tracker & Telemetry Device

The AL1 is the best selling quality vehicle tracking and telemetry device in our range. Small size of 80x48x26mm this device has a wide range of accessories to suit any application. With a built in 3 axis G-sensor functioning at 400Hz the AL1 is able to accurately record harsh driving events and accident impact. Its wide range of available accessories such as 1 Wire Driver ID, RFID Reader, 1 Wire Temperature probes, In-cab Camera support, Garmin FMI capability and Squarell  CANBus interface  make this unit the choice for light & heavy commercial vehicles.

PRODUCT FEATURES

  • Small and easy installation
  • Data communication by SMS/USSD/TCP/UDP
  • High GPS accuracy
  • GSM jamming detection
  • Built in 3 axis G-sensor
  • FOTA firmware upgrade using FTP
  • Configurable real time tracking and logging
  • Intelligent event control engine
  • 32 user defined geofences
  • Roaming preference settings
  • Harsh driving behavior events
  • Configurable power management
  • 1 Wire driver ID*
  • 1 Wire temperature sensors  (max 3)*
  • 3 Digital inputs*
  • 2 Digital outputs*
  • 1 Analogue input*
  • 1 RS232 Interface
  • Internal GSM antenna
  • GPS antenna tampering alarm

*Note up to 3 digital inputs or 2 digital outputs or 1 analogue input as maximum.

ACCESSORIES

1-Wire iButton Tag

Key fob tag provides unique driver identification and authorisation via the dashboard mounted reader

1-Wire iButton Reader

Mounted on dashboard providing reading of the I Button Tag for driver identification and authorisation purposes. Directlywired to tracking device

1-Wire Temp Sensor

Used to report temperature in cargo compartments. Up to 3 can be used with each tracking/telemetry device

Trailer ID

Utilizing 1 wire technology this economical trailer  identificaton device enables the tracker unit to report identification of the trailer connected.

RFID Reader

Used for identify driver or cargo this RFID Reader conforms to Mifare/Desfire/ISO specifications and can be used with PVC ID Cards as well as  permanently fixed Asset Tags. PVC ID Cards can be supplied on request.

RFID tag

Utilized to provide a small low cost RFID keyfob driver Id device this device is allocated to drivers and uses the NFC capability to identifiy and authorize vehicle use.

RFID CARD

Standard PVC printed cards wih individual drivers names and details. Can be custom designed and supllied in minimum quantities of 100

RFID 13.56MHz Mifare/Desfire

13.56MHz Mifare/Desfire RFID Reader (w/ 4pin connector, 90cm)

 

CMOS Camera 7570

This 0.3 megapixel camera is used to automatically take a snapshot when user defined events take place. Uses RS232 connector to tracking unit. View angle 120 degrees

CMOS Camera 5650

This 0.3 megapixel camera is used to automatically take a snapshot when user defined events take place. Uses RS232 connector to tracking unit. View angle 90/60 degrees

CMOS Camera Dome

This 1.3 megapixel high resolution camera is used to automatically take a snapshot when user defined events take place. Uses RS232 connector to tracking unit. View angle 120 degrees

Self-drive Buzzer

Provides audible signal to driver when speed is exceeded, or harsh braking, excessive acceleration or aggressive swerving events occur. Normally helps reduce fuel consumption.

e-drive-buzzer_220x110

 


				

Waterproof Case

Providing an IP67 water proof housing for tracking  devices this accessory is fitted with 2 hermetically sealed glands for input/output or power cabling.

Barcode Scanner

Barcode scanner used for courier proof of delivery systems directly plugs into tracking telemetry device

Cigar Power Cable

Used to provide power for temporary installation of tracking devices. Ideal for 3rd party short term vehicle use.

OBDII power cable

Used to provide power from the OBDII socket to tracking units for temporary or semi-permanent installation

12V / 24V Relay

Provides starter disable or fuel cut off for vehicle security purposes. Directly wired to digital output of tracking device.

SOS Button

Connected to the digital input of the tracking device this provides an unlocked mode suitable for  indicating an alarm event.

Privacy ON/OFF Button Cable (locking) (mechanical type)

Wired directly to a digital input on the tracking device and used for indication of private or business vehicle use or to disable tracking.

RS1

Cable for expansion of RS232 ports from 1-3. Used to connect terminals and hand RFID readers etc to selected trackers.