AT5p Heavy Duty Tracker
and Telemetry Unit with Voice & Multiple Input/Outputs
Designed for use in demanding situations where accurate positioning, driver identification, 2 way voice communication and several devices must be connected the AT5 meets all these criteria. Metal construction and flexible mounting options enable this device to installed easily and securely. With 6 Digital Inputs and 4* Digital Outputs this unit can handle up to 3* Analogue Inputs for fuel control and temperature control etc. The 1Wire input can run Driver ID as well as up to 4 temperature probes for cargo hold monitoring. A RS232 serial portal can be used for connection to Garmin FMI and FMS/CAN monitoring interfaces.
- AES-128 data encryption
- Data communication by SMS/TCP/UDP/USSD
- GPS Antenna tamper alarm
- Built in 3 axis G-sensor
- Vehicle Speed Sensor (VSS) supported
- FOTA firmware upgrade using FTP
- Configurable Real Time Tracking and Logging
- 64 user defined geofences in circular/rectangular/polygonal shapes
- Roaming preference settings
- Harsh driving behavior events
- Configurable power management
- Max 140,000log and 21000 queued messages
- 2 way voice communication & wiretap
- 1-Wire I Button support for driver identification
- 1-Wire temperature sensor supported
- Support for Garmin FMI 2.0 and above
- Support for most FMS/CAN interface units
- Intelligent event control engine
1-Wire Temp Sensor
Used to report temperature in cargo compartments. Up to 3 can be used with each tracking/telemetry device
1-Wire iButton Tag
Key fob tag provides unique driver identification and authorisation via the dashboard mounted reader
1-Wire iButton Reader
Mounted on dashboard providing reading of the I Button Tag for driver identification and authorisation purposes. Directlywired to tracking device
Utilizing 1 wire technology this economical trailer identificaton device enables the tracker unit to report identification of the trailer connected.
Used for identify driver or cargo this RFID Reader conforms to Mifare/Desfire/ISO specifications and can be used with PVC ID Cards as well as permanently fixed Asset Tags. PVC ID Cards can be supplied on request.
Utilized to provide a small low cost RFID keyfob driver Id device this device is allocated to drivers and uses the NFC capability to identifiy and authorize vehicle use.
Standard PVC printed cards wih individual drivers names and details. Can be custom designed and supllied in minimum quantities of 100
RFID 13.56MHz Mifare/Desfire
13.56MHz Mifare/Desfire RFID Reader (w/ 4pin connector, 90cm)
Metal robust casing for permanent fixing of ABS tracking devices.
Speaker with Mounting Bracket & Screws / 3.5mm Jack
Provides high quality in cab voice communication with driver. Supplied with mounting ket and fixing screws
Microphone with Adhesive and 3.5mm Connector Jack
Plugs directly into selected tracking units to provide voice communication with driver and dispatcher. Adhesive fixing to dashboard or interior.
5V 95dB 2.9KHz E.Drive Buzzer
CMOS Camera 7570
This 0.3 megapixel camera is used to automatically take a snapshot when user defined events take place. Uses RS232 connector to tracking unit. View angle 120 degrees
CMOS Camera 5650
This 0.3 megapixel camera is used to automatically take a snapshot when user defined events take place. Uses RS232 connector to tracking unit. View angle 90/60 degrees
CMOS Camera Dome
This 1.3 megapixel high resolution camera is used to automatically take a snapshot when user defined events take place. Uses RS232 connector to tracking unit. View angle 120 degrees
Barcode scanner used for courier proof of delivery systems directly plugs into tracking telemetry device
12V 24V Relay
Provides starter disable or fuel cut off for vehicle security purposes. Directly wired to digital output of tracking device.
Connected to the digital input of the tracking device this provides an unlocked mode suitable for indicating an alarm event.
Privacy ON/OFF Button Cable (locking) (mechanical type)
Wired directly to a digital input on the tracking device and used for indication of private or business vehicle use or to disable tracking.
Cable for expansion of RS232 ports from 1-3. Used to connect terminals and hand RFID readers etc to selected trackers.
Cable to connect RS485 interfaced devices (fuel level probes and temperature controllers) to selected trackers.
Used to connect tracking device to a Iridium modem in order to provide satellite communications where GSM coverage is not available